Lodderinge2018-09-21T13:45:13+00:00

Brazing Rings

Here you can find information about Metalli’s production of brazing rings.

Filler metal types and ring dimensions. Production, control, cleaning and packaging.

Name

Ring

Diameter

Wire

Diameter

  Photos

Metalli 33 to 55

These rings are made from silver brazing filler metals and can be used with the majority of metals with a flux or in a controlled atmosphere. We can deliver the rings within 14 days or if urgent, from day to day.
 3.0 – 126.0 mm 0.5 – 2.5 mm    
Rings

Metalli 5P/15P/18P

These rings are made from silver/copper – phosphorus filler metals. Genreally used for copper/copper applicatins without the use of a flux. We can deliver within 14 days or if urgent, from day to day.
 5.0 – 45.0 mm 0.8 – 2.0 mm  
Rings

Soft Solders

These rings are made from the soft solder range, silver/tin/copper. We can deliver within 14 days or if urgent, from day to day.
 5.0 – 45.0 mm 0.8 – 2.0 mm  
Rings

Segments

We can supply this type in straight lengths or as segments of a ring circle, using silver brazing filler metals, silver/copper – phosphorus or simple as pure copper. We can deliver within 14 days or if urgent, from day to day.
     
Rings
         

Brazing Ring Production

Here you can find information about Metalli’s production af Brazing Rings.

Wire/Machines/Process/Packaging.

Name       Photos/Film

Wire

The wire we use in our ring production is primarily on 10 kg spools (SD300), which are best suited for our ring production.
       
see wire

Torin

These machines produce rings individually, diameters from 3.0 mm to 32.0 mm. Each machine is capable of producing approximately 20,000 rings per hour.
     
Torin machine

Ringpack

These machines are primarily for larger ring dimensions, from about 35.0 mm up to 126.0 mm, but can also produce some smaller diameters, minimum approximately 10.0 mm (depending on filler metal type). The rings are made as a spring tube, which is then taped and cut. The rings and supplied as seen in the photo (packaging of ringpack).
     
Ringpack machine

Segments

This machine type produces segments in straight lengths from 5.0 mm up to 250 mm.
     
Segment machine

Process

Our rings are washed at 60 degrees C in a environmentally friendly degreaser and then dried.
     
Cleaning 1
Cleaning 2
Drying

Packaging

Our rings are packed in three types of air-tight plastic bags to avoid oxidation. The plastic bags are then labelled. Specific labelling requirements can be discussed with the customer.
     
see packaging of ringpack
see packaging of torin