Flux2018-09-21T13:45:14+00:00

Flux

Here you can find Metalli’s main product range of fluxes. In the table you can obtain further information about each individual product.

Other flux types are available. If you require a specific flux that is not listed, contact us and we will strive to fulfill your flux requirements.

Name Product Sizes Working Range °C EN 1045 Datasheet

Metalli All Round Flux

Powder/Paste

This flux can be used on most engineering metals (not Aluminium). Residues can be removed with warm water, followed by brushing.
0,5/1,0/5,0 kg 450-800 FH10  
Datasheet

Metalli Hard Metal Flux

Paste

This flux is particularly suited to tungsten carbide and gives good wetting properties. Residues can be removed with warm water, followed by brushing.
0,5/1,0/5,0 kg 500-900 FH12  
Datasheet

Easy-flo Flux

Powder

This flux can be used on most engineering metals (not Aluminium). Residues can be removed with warm water, followed by brushing.
0,25/0,5/5,0 kg 550-800 FH10
Datasheet

Easy-flo 100 Flux

Paste

This flux is particularly suited when brazing steel. Good flux effect with high concentrated heating, recommended for induction brazing. Residues can be removed with warm water, followed by brushing.
1,0 kg 550-800 FH10  
Datasheet

Easy-flo High Temperature Grade Flux

Paste

This flux can be used on most metals and is active at higher temperatures, retains good stability and resistance to overheating. Residues can be removed with warm water, followed by brushing.
0,5/1,0/7,0 kg 575-825 FH10  
Datasheet

Tenacity No. 6 Flux

Powder/Paste

This flux is recommended when brazing tungsten carbide and stainless steel. Residues can be removed with warm water, followed by brushing.
0,5/1,0/4,0 kg 550-800 FH12  
Datasheet

Tenacity No. 125 Flux

Powder/Paste

This is a high temperature flux recommended for bronze filler metals when brazing steel and tungsten carbides. Residues can be removed with a 10% acid solution or mechanical cleaning.
0,4/0,7 kg 750-1200 Fh21  
Datasheet

Soft Solder Flux 1S

This flux can be used for soft soldering and is a highly active flux. Suitable for steel. The flux is corrosive and should be cleaned with hot water.
1,0 ltr. 180-350    
Datasheet